System expansio ns
1
► Break out the pre-stamped metal cover on the drive b ay opening with a screwdriver (1).
► Secure the fro nt panel on the casing again.
2
2
1
► Slide the
drive into the casing (1). Make sure that the screw holes are aligned.
► Fasten the drive into place with the screws (2).
► Plug the
data and th e power sup ply connectors into the drive. Make sure the polarity is correct.
► If there is an accessible drive, please install it again.
► Close t
he casing (see "
Closing the casing" , Page 31).
Fujitsu 33
To Next Page
Loading...
