Item ETERNUS DX200 S4
Maximum heat
generation
(*7)
Controller enclosure 2.5" type AC 100 – 120V 3,100kJ/h
AC 200 – 240V 3,100kJ/h
3.5" type AC 100 – 120V 2,900kJ/h
AC 200 – 240V 2,900kJ/h
Drive enclosure 2.5" type AC 100 – 120V 1,600kJ/h
AC 200 – 240V 1,600kJ/h
3.5" type AC 100 – 120V 1,300kJ/h
AC 200 – 240V 1,300kJ/h
High-density type AC 100 – 120V 4,700kJ/h
AC 200 – 240V 4,700kJ/h
Maximum amount
of exhaust air
Controller enclosure 2.5" type
4.0m
3
/min
3.5" type
4.0m
3
/min
Drive enclosure 2.5" type
4.0m
3
/min
3.5" type
4.0m
3
/min
High-density type
12.0m
3
/min
Environmental con-
ditions
Temperature Operating 10 – 40°C
Not operating 0 – 50°C
Shipping -40 – 60°C
Temperature gradient 15°C/Hr or less
Humidity Operating 20 – 80%RH
Not operating 8 – 80%RH
Shipping 8 – 90%RH
Humidity gradient 30%/day or less
Maximum wet bulb temperature 29°C
Altitude above sea level 0 – 3,000m
Airborne dust
0.15mg/m
3
or less
Gas concentration tolerance level Cl
2
: 6.8ppb or less, H
2
S: 7.1ppb or less,
SO
2
: 37ppb or less,
NH
3
: 423.5ppb or less,
NO
2
: 52ppb or less, O
3
: 5ppb or less,
HCl: 6.6ppb or less, HF: 3.6ppb or less
Oil vapor
0.2mg/m
3
or less
Seawater (salt corrosion) If the storage system is installed on the
ocean or premises within 0.5km from the
coast, necessary measures must be taken
to prevent salt corrosion.
Vibration limit Operating 400gal
Not operating 1,000gal
Noise emission
(*8)
Sound pressure level 49dB (A)
Sound power level 6.7B
1. ETERNUS DX Installation
Installation Specifications
14
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems
Site Planning Guide
Copyright 2021 FUJITSU LIMITED
P3AM-7632-18ENZ0
To Next Page
Loading...
