Fujitsu fi-4860C2 - Hole-Punching Prohibited Areas

6-6
6.3 Hole-punching Prohibited Areas
6.3 Hole-punching Prohibited Areas
Punched holes in the shaded areas may cause errors.
For job separation sheet requirements, please refer to the section "6.6 Job Separation Sheet" on
page 6-9.
113 (4.45") 134 (5.28")
79 (3.12") 96 (3.78")
10
(0.39")
15
(0.59")
Front side
Reading surface
Document feeding direction
(Unit : mm)
Top of document
Bottom of document
Center of document
10
(0.39")
Reading
reference
position
10
(0.39")
10
(0.39")
10
(0.39")
10
(0.39")
12
(0.47")
12
(0.47")