Fujitsu fi-4860C2

2-15
2.6 Correcting skewed Documents
2
SCANNING VARIOUS TYPES OF DOCUMENTS
2.6 Correcting skewed Documents
You can set the scanner so that skew of documents is detected and corrected automatically when
skewed documents are fed into the ADF.
The following shows examples for chaning the setting in the [TWAIN Driver] dialogbox to enable
this function.
The following shows the procedure for changing the setting in the dialogbox.
1. Click the [Option...] button in the [TWAIN Driver] dialogbox.
⇒ The dialogbox appears.
2. Click the [Rotation] tab.