Fujitsu fi-4860C2

7-72
7.5 Test Mode Details
7.5 Test Mode Details
1. Single feed test mode
Without connecting to a PC, the scanner's whole mechanism’s operation can be
checked.
Only one sheet is fed with this test.
Scan parameters can be changed for scan test.
Imprinter test print can be performed at the same time.
1) Place the documents to scan on the hopper.
2) Press (Next button) or (Previous button) and let the LCD show
<Screen50>.
<Screen50>
3) At <Screen50>, press (Enter button) or (Start button). Then
<Screen50-1> is displayed.
<Screen50-1>
4) At <Screen 50-1>, press (Right arrow button) and select [Setup].
Press (Enter button) or (Start button). Then <Screen50-2> is
displayed.
<Screen50-2>
5) Specify the scanning conditions.
(1)At <Screen50-2>, select the left most item, [S] in the sample screen, and
press (Enter button). Then the LCD display shows <Screen50-
2.1>.
<Screen50-2.1>
T
0
1
Si
ng
l
e
fe
e
d
SA4P
W
2
B00
TTSAR e p
S
t
u
e
t
S
A
4
P
W
2
B00
M
S
S I
M
I
LEP X
P
EL
X
/ U
P
D
L
EX