EasyManua.ls Logo

Fujitsu fi-4860C2

Fujitsu fi-4860C2
316 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7-19
7.3 Setup Mode Details
7
OPERATOR PANEL MENUS
3. Setting Pick Speed
1) Press (Next button) or (Previous button) and let the scanner show
<Screen3>.
<Screen3>
2) At <Screen3>, press (Left arrow button) or (Right arrow button) and
select Pick roller rotation speed.
3) Press (Enter button) to confirm the setting.
Press (Exit button) at the end and the LCD display goes back to [Ready]
screen.
HINT
The blinking item is the one selected.
HINT
Pick roller rotation speed should be set Slow for scanning thin or soft docu-
ments, these documents tend to cause a Mis-pick to occur.
Picking speed When Mis-pick occurs frequently
Fast (Factory default) Decreases the Pick speed
Mid
Slow
HINT
When the Pick speed is set at "Mid" or "Slow", the scanner will slow down.
03
kpc
!
e
eS
=
P
i
/diM
/
t
d
Fas
wol
S

Table of Contents

Other manuals for Fujitsu fi-4860C2

Related product manuals