7-49
7.3 Setup Mode Details
7
OPERATOR PANEL MENUS
20. Setting of Product ID (Scanner model number)
1) Press (Next button) or (Previous button) and let LCD display
<Screen20>.
<Screen20>
2) At <Screen20>, press (Left arrow button) or (right arrow button) and
select Product ID.
The following are the selectable Product IDs.
(1) fi4860C
(2) fi4990C
(3) M4099D
(4) M3099G
By pressing (Left arrow button), selection moves from (4) to (1).
By pressing (Right arrow button), selection moves from (1) to (5).
3) Press (Enter button) to confim the setting.
Press (Exit button) at the end and the LCD display goes back to [Ready]
screen.
HINT
The blinking item is the one selected.
HINT
Usually, Product ID does not need to be changed.
2
0
r
I
P
!
D
od
fi 8
60
4
/f
i
C4
9
9
0
C
c
tu
To Next Page
Loading...
