●AP-9
■ Error mesage (Temporary error :Check LED blinking)
Check LED blinks when the following errors occur except <Hopper empty> and <Mis-pick>.
<Hopper empty> The following messages are displayed if no documents are on
the hopper during the scanning opperation. Please place docu-
ments on the hopper. Scanning is continued, when you place
documents on the hopper for re-scanning.
To clear this message, press the button.
HINT
Check LED does not blink at Hopper empty error.
(at Double-feed)
HINT
"xxxx" shows the number of Batch counter value.
<Paper Jam> The following message displayed if a document is jammed in the
ADF.
Refer to "5.1 Clearing Document Jams" on page 5-2 for remov-
ing the document remained in the scanner.
HINT
One of "1" - "8" is displayed instead of "x", depending on paper jam status.
per E
xxxx
mp
x
Pa
ty
D
u
e
l
ob
F
edex
xx
x
x
pe
rEmp
Pa
t
y
per Ja
m
Pa
x
To Next Page
Loading...
