1-37
1.10 How to use the Scanner Driver
1
BASIC SCANNER OPERATIONS
8. The [Profile Editor] window appears. Click the [OK] button to return to
[New batch] dialog.
9. Load the documents on the scanner.
10. Click the [Scan] button.
⇒ Scanned images are displayed on the window.
Refer to the "QuickScan Overview" or the "QuickScan Help" for further
information on functions and operations of QuickScan. After the installation of
QuickScan, it is registered in the [Start] menu.
HINT
Configure other settings of the profile, if necessary.
Refer to the "QuickScan Overview" or the "QuickScan Help" for further
information on functions and operations of QuickScan
TM
. After the installa-
tion of QuickScan, it is registered in the [Start] menu.
To Next Page
Loading...
