115
4.4 Cleaning the Rollers (with a lint-free cloth)
4
DAILY CARE
4. Clean the Pick roller and the rubber surface of the Separator rollers using
the cleaner F1.
5. Close the roller cover after the cleaning is finished.
6. Open the Pad cover.
Grab both sides of the cover, press to the inside and pull down (towards you), as shown in the
illustration below.
It may take long before the cleaner vaporizes if a large quantity is used.
When cleaning the scanner parts, dampen a cloth with modest quantities
of the cleaner. In addition, wipe off the cleaner completely with a soft lint-
free cloth to leave no residue on the surface of the cleaned parts.
Separator roller
Pick roller
Roller cover
To Next Page
Loading...
