169
7.5 Multifeed Detection Conditions
7
DOCUMENT SPECIFICATIONS
• When you want to detect overlapping, be sure that paper documents are
not clinging to each other. Those clinging documents (glued or with static
cling) may cause a lower multifeed-detection ratio.
• The area shown in Fig. 1 can be changed using the Software Operation
Panel. For details, please refer to "8.4 Multifeed Detection" on page 188.
Feeding Direction
35
35
35
Feeding Direction
35
㧔Unit: mm㧕
Fig.1 Fig.2
60 60
To Next Page
Loading...
