37
2.12 Feeding Documents Manually
2
BASIC SCANNER OPERATIONS
6. Repeat the procedure 5 until all the documents are scanned.
After a certain time period of inactivity or at pressing of [Send to] button, the scanner will
recognize it as “no document” and stop scanning.
7. To deactivate “Manual Feed Mode” (Single Feed), return the Pick roller
unit to its original position.
Flip down the small plate on the left using your finger.
For setting the timeout for feeding the document manually, refer to section
“8.25 Timeout for Manual Feeding” on page 215.
To Next Page
Loading...
