Fujitsu FI-6010N - Communicating to the LDAP Server

2.2 Communicating to the LDAP Server
fi-6010N Network Scanner Associated Servers Setup Guide 7
2
2.2 Communicating to the LDAP Server
The scanner searches user data in the following way:
1. When the scanner receives a user login request, the scanner binds to the LDAP
server using the user name and password specified at the time of the request.
2. To check if the user name specified at the time of the login has been registered, it is
searched for in the LDAP server. The LDAP server searches LDAP entries using the
search base (DN). If the user name has not been registered in the LDAP server, the
login request is refused.