Fujitsu FI-6010N - Setting the LDAPS Sever; Importing a Certificate

2.5 Setting the LDAPS Sever
fi-6010N Network Scanner Associated Servers Setup Guide 23
2
2.5 Setting the LDAPS Sever
2.5.1 Importing a Certificate
To connect to the LDAPS, a certificate must be imported to a personal computer installed with
Active Directory. The procedure for importing a certificate is as follows.
1. Select [Start] - [Run].
⇒ The "Run" dialog box appears.
2. Specify "mmc" in the "Open" field.
3. Click the [OK] button.
⇒ The "Console1" screen appears.