56
5.1 Summary
The scanned data can be output to the printer connected to the print server.
To use the print server, set the following information on the print server.
The scanner prints on printers connected to the print server. The printing method corresponds to
the print properties set on the print server.
Therefore, it is recommended to add printers for which printing properties have been set on the
print server.
To connect the scanner to a print server, login as the administrator, select [Network Settings] -
[Network Printer], and set the following information
.
Info Save in ... Used to ...
Printer Print server Set a printer to be used with the scanner.
Info Used to ...
Printer Set a shared printer from the printer folder on the print server. The same
printer can be specified more than once with different properties settings.
To Next Page
Loading...
