8
2.3 Installing Active Directory
Your computer starts to operate as a domain controller by installing Active Directory.
The following shows the procedure for installing Active Directory and the DNS function of Win-
dows Server
®
2003.
1. Select [Start] - [Run...].
⇒ The "Run" dialog box appears.
2. Specify "DCPROMO" for the "Open" input field.
3. Click the [OK] button.
⇒ The "Active Directory Installation Wizard" screen appears.
HINT
Check the following before installing Active Directory.
• Check that the network information (IP address, subnet mask, default gateway,
DNS server) is set.
• Check that the LAN cable is connected.
When the network is not properly set up or the LAN cable is not connected, a
caution or warning message may appear while installing Active Directory.
To Next Page
Loading...
