Fujitsu FI-6010N - E-Mail Gateway Settings

9.2 E-mail Gateway Settings
fi-6010N Network Scanner Associated Servers Setup Guide 81
9
9.2 E-mail Gateway Settings
The following shows the procedure for setting E-mail Gateway.
1. Create a POP3 mailbox for E-mail Gateway.
Create a POP3 mailbox to be used exclusively for the E-mail Gateway.
E-mail Gateway monitors the mailbox regularly for e-mails to be sent by fax.
2. Add and configure E-mail Gateways.
1. Run the E-mail Gateway configuration program.
Run the E-mail Gateway configuration program in one of the following ways.
• If you did not add an e-mail gateway during the RightFax server installation, you
can open the E-mail Gateway configuration program from Windows Control
Panel.
• If you already have one or more e-mail gateways configured, you can open the E-
mail Gateway configuration program by double-clicking the RightFax E-mail
Gateway service in Enterprise Fax Manager.
⇒The "E-mail Configuration" dialog box opens.
2. Add a new E-mail Gateway.
Click the [Add Gateway...] button and select "SMTP/POP3".