Getting started
Getting started
Gettingstarted
Please observe the safety information in the "Imp ortant notes", P age 12 chapter.
Unpacking and checking the delivery
The display surface of the device is sensitive to pressure and scratches.
Always ho ld the device by the casing!
It is recommended not to throw away the original packaging material! It may be
required for reshipment at some later date.
PackagingContentso f deliver
y
Packaging,
The complete de vice package includes:
• one CD with software and documentation
• one Warranty Booklet
• one "Quick Start Guide"
• one "Sa fety" manual
► Unpack all the individual parts.
► Check the contents of the package for any visible damage caused durin g transport.
► Check whether the delivery conforms to the details in the delivery note.
► Should you discover that the delivery does not correspond to the delivery
note, notify your local sales outlet immediately.
Steps for initial setup
Preparingf or firstuse ,overvie wPreparingf or use,
Only a few steps are necessary to put your new device into operation for the first time:
• Select a location for device and set up device
• Check the voltage at the m ains outlet a nd connect th e device to an electrical outlet
• Switch the device on
You will learn more about the individual steps in the following sections.
External devices
If you have r eceived other external devices in addition to your own device (e.g.
a printer), do not connect these until after the initial installation. The following
sections describe how to connect these exte rnal devices.
Fujitsu 19
To Next Page
Loading...
