EasyManua.ls Logo

Fujitsu FUTRO X913 - Selecting the Application Mode; Adjusting the Picture Size and Position; Setting Colour Temperature and Colours

Fujitsu FUTRO X913
65 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation
Selecting the application mode
Call up the Mode setting window
sRGB
Predened settings for sRGB (reduced brightness)
Ofce
Ofce presets (the settings for colour and sharpness can be adjusted)
Photo
Predened settings for photo (colour, sharpness , saturation)
Video
Predened settings for video (colour, sharpness, saturation)
ACR = Dynamic contrast (on / off)
OD =Overdrive
Adjusting the picture size and position
Call the Image adjust setting window
Sharpness
Adju st the picture denition for Ofce, Photo and Video mode .
Saturation
Adjust the colour sa
turation for Ofce, Photo and Video mode.
Expansion
Adjust the picture
size
Full screen =sele
ction of full screen mode
Keep aspect =max
imum picture size without distortion (only for PC image)
Setting colou
r temperature and colours
Call the Colour setting window
Select the colour temperature
The "warmth" of the screen colours is set using the colour temperature. Th e
colour temperature is measured in K (= Kelvin). You can choose between
sRGB, 6500 K, 7500 K, 9300 K, Native and Custom Colour.
The options sRGB, Native and Custom colour are only available in the Ofce
setting mode.
In the user-den ed setting you can change the colour ratios of the basic
colours (red , green, blue) as required.
36 Fujitsu

Table of Contents

Other manuals for Fujitsu FUTRO X913

Related product manuals