Operation
Indicators on the device
The indica tors are on the fron t of the casing.
1
No. indicato r Description
1 Power-on indicator
Caution:In energ
y saving mode, the d evice must not be
disconnected fro
m the mains supply as this can cause loss of data.
• The indicator i
s illuminated:
The device is switched on.
•Theindicator
is flashing:
The device is in energy-saving mode. After being sw itched on
with the ON/O FF switch, the device pow ers up or returns to th e
state it was in before it entered energy-saving mode.
• The indicato
r is not illuminated:
The device is switched off (disconnected from the mains) or is
ready to o perate . If the device is r eady to operate, it can be
switched on with the O N/O F F switch.
In energy-saving mode the device must not be disconnected from th e
mains s upply, as data loss may occur.
40 Fujitsu
To Next Page
Loading...
