Operation
Settings in BIOS Setup Utility
BIOSSetupUtilitySystemsettings,BIOSSetupUtilityConfiguration,BIOSSetupUtilitySetupS ystemconfigurationHardwareconfigurati on
The BIO S Setu p Utilit y allows you to s et the system functions and the
hardware configura tion for your device.
When it is supplied, the device is set to factory default settings. You can change
these settings in the BIOS Setup Utility menu. Any changes you make take effect
as soon as you save and exit the BIOS Setu p Utility.
The BI OS Setup Utility program contains the following menus:
Menu Description
Main
System settings such as
time and date
Advanced
Advanced system setti
ngs
Security
Password settings a nd security functions
Power
Energy saving function
Event Logs
Protocol settings
Boot
Configuration of t
he start-up sequence
Save & Exit
Exits the BIOS Se
tup Utility
The following function keys can also be used:
Key Description
Esc
To exit the BIOS Setu p Utility.
The current settings are not saved.
F2
To reject changes and load the p revious configuration of the BIOS Setup
Utility.
F3
To load the
default configuration of the BIOS Setup Utility.
F4
To exit the
BIOS Setu p Utility.
The curre
nt settings are saved.
Starti
ng the BIOS Setup Utility
► Reboot the device (switch off/on or reboot the operating system).
BIOSSetupUtility
The fol
lowing or a similar display appears on the screen at start-up:
<F2> BIOS Setup <F12> Boot Menu
► Press the function key
F2
.
► If a p
assword has been assigned, enter the password and press the Enter key.
If y
ou have forgotten the passw ord, con tact your system administrator
or c
ontact our customer service centre.
The BIOS Setu p Utility starts.
48 Fujitsu
To Next Page
Loading...
