Fujitsu FUTRO X913 - LCD Screen; Changing the Monitor Settings with the Buttons of the Control Panel

Operation
LCD screen
LCDscreenNotes
High-quality TFT monitors are installed in systems from Fujitsu Technology Solutions GmbH. For
technical reasons, TF T monitors are manufactured for a specific resolution. An optimal, clear
picture can only be ensured w ith the correct resolution intended for the relevant TFT m onitor. A
screen resolution which differs from the specification can result in an unclear picture.
The screen resolution of the LCD monitor of your system is optimally set at the factory.
TFT m onitors are operated with LED background lighting. The luminosity of
the background lighting can decrease during the period of use of the system.
However, you can set the brightness of your m onitor individually.
Changing the monitor settings with the buttons
of the control panel
The buttons of the control panel have two fun ctions. W hen the OSD menu is
active, the current meaning of the buttons is sho w n d irectly over the butto ns
on the edge of the screen (softkeys). With the O S D menu not activated,
you can make the following settings directly:
1
23
1 = Buttons for the OSD menu (O n
Screen Display)
2=ON/OFF
switch
3 = Power supply indicator
32 Fujitsu