Fujitsu FUTRO X913 - Notes on Ergonomic Colour Adjustment; Preset Operating Modes

Operation
Notes o n erg onomic colour adjustment
If you select colours for the monitor in your app lication programmes,
take no te of the information below.
The primary colours blue and red on a dark background do not produce the minimum
required contrast of 3:1 and are therefore not suitable for continuous text and data entry.
When using several colours for characters and backgrou nd and giving the primary colours full
modulation, you can obtain very suitable colour combinations (see the following table):
Characters
Background
black white purple blue
cyan green
yellow red
black
++
-
+++
-
white
+++
---
+
purple
++
-----
blue
-
+
-
+
-
+
-
cyan
+
--
+
---
green
+
--
+
---
yellow
+
-
++
--
+
red
-
+
----
+
+ C olour combination very suitable
- Colour combination not suitable because colour hues are too close together, th in characters
are not identifiable or rigorous focusing is demanded of the human eye.
Preset operating modes
The picture position and size have been set to optimum values at the
factory for the operating m odes listed above.
For ergonomic reasons, a screen reso lution of 1920 x 108 0 pixels is recommended.
Because of the technology used (active matrix), an LCD mo nitor provides a
totally flicker-free picture, even with a refresh rate of 60 Hz.
38 Fujitsu