Fujitsu FUTRO X913 - Adjusting the Brightness and Contrast

Operation
► To h ighlight a different function, press the
ECO
/ button or the / button.
► To change the s ettin
g, press the
(4th button from left) / button or
the
(5th button fro
m left) /
button.
► To h ighlight a different function, press the
ECO
/ button or the / button,
► to save the change, press the
MENU
/ button or the
(6th button from l eft) / button to exit the function w itho ut change.
If you want to change other settings, select the corresponding function from the OSD
main menu. All possible adjustments of the main menu are described in the following.
Adjusting the brightness and contrast
Call up the Brightness/Contrast setting window
Brightness
Set the brightness of the display
With this function you change the brightness of the background lighting.
Contrast
Set the contrast of th e display
With this function you modify the contrast of bright colour tones.
Black lev el
Set the brightness of the display
With this fun ction you modify the contrast of dark colour tones.
If the c ontrast is set too high, bright su rfaces can no longer be distinguished from very
bright surfaces. If the contrast is set too low, the maximum brightn ess will not be achieved.
Fujitsu 35