Operation
Setting functions
Call up the Setup settings window
Language
Set the language for the OSD menu
With this function yo u select the language for the OSD m enu.
The default setting is English.
Camera
(optional)
Activate/deac tivate cam era
On = Optional camera activated (default setting)
Off = Optional camera deactivated
Presence sensor
(optional)
Activate/deactivate presence sensor
On = Optional presence sensor activated (default setting)
Off = O ptional presence sensor deactivated
DDC-CI
Activates/deactivates the DDC-CI fu nction
On = The DDC-CI function is activated (default setting)
Off = The DDC-CI function is deactivated
OSDTimeout
Set the display duration of the OSD menu
With this function you select a value from 10 to 120 seconds.
If the set time expires without a setting being made, the OSD menu
is automatically faded out.
Factory recall
Activate the factory settings
With this function all settings are reset to the factory settings without
prompting for confirmation.
The function is executed with the
button (5th button from left). The
language selection menu appea rs.
The settings functions for the camera and the presence sensor are only
displayed if the optional camera module is installed.
Displaying information
Call the Information setting window
This function displays the resolution, application mode, colour temperature,
H/V frequency, ACR status and ECO mode.
Fujitsu 37
To Next Page
Loading...
