Fujitsu FUTRO X913 - Connecting an External Monitor; Connecting External Audio Devices

Getting s tarted
Connecting an external monitor
It is possible to connect a digital m onitor to the DVI monitor port. Screen output is
limited to a maximum of two monitors at any one time (see "
Important keys and
keyb oard shortcuts", Page 41, section "Toggle screen output").
MonitorMonitorport
Digital DVI monitor port
► Switch off the system.
► Plug the data cable of th e external monitor into the monitor port.
► First switch on the external monitor and then the system.
You can also switch back and forth between the external monitor and the LCD monitor
of the system, see chapter "
Important keys and keyboard shortcuts", Page 41.
You can display the same picture on the external monitor and the
system’s LCD monitor simultaneou sly.
Connecting external audio devices
Microphone port/Line In
Audiodevi
ces,conn ect ing
Audioport
s
Microphon
e,conn ecting
The microphone port/Line In allows you to connect an external microphone, a MiniDisc
player, MP3 player, CD player or a tape deck to your system.
► Connect the audio cable to the
external device.
► Connect the audio cable to the microphone
port/Line In of the system.
28 Fujitsu