Getting started
Connecting a USB mouse
► Connect the USB mouse to one of the USB ports on the device.
Connectinga USBm ouseUSBport
Connecting a USB keyboard
Only use the keyboard cable supplied with the keyboard (not within the delivery scope of the device).
USBportConnecting
► Plug the rectangular connector of the keyboard c able into the rectangular socket
on the underside or on the rear of the keyboard.
► Insert the flat rectangula
r USB plug of the keyboard cable into a USB port o f the device.
USBport
Connecting external devices to the USB ports
USBdevices,USB port,Externaldevices,Devices,
You can conne ct a wide range of external devices to the USB ports (e.g.
printer, scanner, modem or keyboard).
USB devices are hot-pluggable. T his means you can connect and disconnect
USB cables while your device is switched on.
Additional information can be found in the docum entation for the USB devices.
► Connect the data cab
le to the external device.
► Connect th e data cable to one of the USB ports on your device.
Device drivers
The external USB devices that you connect to one of the USB ports usually
require n o driver o f their own, as the required software is already included
in the operating system. If th e device requires separate softw are, please
note the information in the manufacturer’s manual.
To ensure the USB transmission capacity, the cable fro m the external USB device
to the USB p ort of your device must not be longer than 3 m.
Fujitsu 27
To Next Page
Loading...
