Operation
Select OSD language
After switching on for the first time, the language selection menu of the display is displayed:
► Press the
(4th button from l eft) / button or the (5th button from left)
/
button, to select the desired language.
► Press the
MENU
/ buttontoconfirm.
After selecting the OSD language for the first time, you can cha nge
it at any tim e in the OSD.
Activating/deactiv
ating ECO operating mode
The power con sumption of the device can be decreased by reducing
the brightness of the picture.
► To activate or deactivate ECO operating m od e, press the
ECO
button.
The message ECO Mode on or ECO Mode off is d isplayed.
If you press the
ECO
button, the brightness of the monitor is reduced to an energy saving s tatus.
After ending ECO mode, the previously set brightness is restored.
Locking the O SD menu
The OSD menu can be locked to prevent accidental or unauth orised changes to the monitor settings.
► Press the
ECO
and buttons (5th button from left) simultaneously for a few seconds.
The message OSD locked / unlocked is displayed.
Please proceed in the s ame manner to release the locked OSD menu again.
Fujitsu 33
To Next Page
Loading...
