First-time setup of your device
First-time setup of your devic
e
First- time setu pGettingstarted
Please read the chapter "Important notes", Page 12.
If your device is equipped with a Wi ndows operating system, the necessary
hardware drivers and supplied software are already pre-installed.
Beforeyouswitchonthedeviceforthefirst time, connect it to the mains voltage
using the mains adapter, see "
Mains adapter connecting", Page 16.Themains
adapter must be connected during the entire installation process.
A system test is performed when your de vice is first switched on. Various messages
can appear. The display may remain dark for a short time or may flicker.
Please follow the instructions on the screen.
NEVER switch off your device during the first-time setup process.
On delivery, the battery can b e found in the battery compartment or in the accessories kit.
The battery must be charged if you want to operate your device using the battery.
When used on the move, the built-in battery provides the device with the necessary po wer. You
can increase the operating time by using the available energy-saving functions.
For instructions on how to conn ect external devices (e .g. mouse, printer) to your
device, please refer to the operating manual for your device.
Unpacking and checking the d
evice
Should y ou discover any damage th at occurred during t ransportation,
notify your local sales outlet immediately!
► Unpack all the individual parts.
PackagingTransport
► Check your device for any visible dam age w hich m ay have occurred during transportation.
You may need the packaging in the future, if you need to transpo rt your device.
Fujitsu Technology Solutions 15
To Next Page
Loading...
