First-time setup of your device
Switching on the device for the first time
Switchingonforthefirst time
On devices with ON /OFF sw itch for wireless components: Slide the O N/O FF switch
for wireless components to the ON position before switching on the device.
When you switch on the device for the first time, the supplied software is
installed and configured. Because this procedure must not b e interrupted,
you should set aside enough time fo r it to be fu lly completed and connect
the device to the mains using the mains adapter.
During the installation process, DO NOT restart the device unless
you are requested to do so!
To make it easier to use your de
vice for the first tim e, the operating syste m
is pre-installed on the hard
disk.
► Switch on your device.
► During installation, follow the instructions on screen.
If a Windows operating system is installed on your device, you will find more
information on the system and drivers, help progra mmes, updates, manuals etc.
on the device or on the Internet at "
http://ts.fujitsu.com/suppor t".
Fujitsu Technology Solutions 17
To Next Page
Loading...
