Settings in BIOS Setup Utility
Exiting BIOS Setup Utility
BIOSSetupUtility
You need to select the desired option in the Exit menu and activate it by pressing the Enter key:
Exit Saving Changes - save chang
es and exit BIOS Setup Utility
► To save the current m enu settings and exit the BIOS Setup U tility, select Exit Saving Changes and Yes.
The note book is rebooted a nd the
new settings come into effect.
Exit Dis carding Changes – Discard changes and
exit BIOS Setup Utility
► To discard the changes, select Exit Discarding Changes and Yes.
The settings in place when BIOS Setup Utility was called remain effective. BIOS
Setup U tility is terminated and the notebook is reboote d.
Load Setup Defaults – Copy Sta
ndard Entries
► To copy the standard entries for all menus of the BIOS Setup Utility,
choose Load Setup Defaults and Yes.
Discard Changes – Discard changes w ithout exiting
the BIOS Setup Utility
► To discard the changes you have made, select Discard Changes and Yes.
The settings in place when BIOS S etu p Utility was called remain effective.
You can now make additional settings in the BIOS Se tu p Utility.
► IfyouwanttoexitBIOS Setup Utilitywith these settings, select Exit Saving Changes and Yes.
Save Changes - save changes without exiting
the BIOS Setup Utility
► To save the changes, select Save Changes and Yes.
The change s are saved. You can no w make additional se tting s in the BIOS Setup Utility.
► If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes.
Save Changes and Power Off
► To save the changes and sw itch off your device, select Save Changes and Power Off and Yes.
The changes are saved. Your device is shut down.
60 Fujitsu Technology S olutions
To Next Page
Loading...
