Working with the notebook
Removing the card
Always remove the card according to the rules described below, to
ensure that none of your data is lost.
You can stop the card using the co rresponding icon in the task bar:
► Left click on the icon to safely remove hardware, located in the taskbar.
► Select the card you w ant to stop
and remove.
► Press the "Enter" key.
Wait for the dialog box which tel
ls you that it is now safe to remove the card.
1
2
► If the eject button is lowered, you must
first cause the eject button to r elease
from the notebook casing. To do this,
press the eject button until it pops out.
Press the eject button (1) so that the card
protrudes a little from the notebook.
► Pull the card out of the slot (
2).
► Insert the card placeholder into the
slot guide.
► Carefully slide the p laceholder for the
cardasfarasitwillgointotheslot.
Do not use excessive force.
Loudspeakers and microphones
Microph
one
Loudspe
akers
Basslou
dspeaker (subwoofer)
Volum ec
ontrol
Information o n the exact position of the speakers and microphone can be found
in "
Ports and operating elements", Page 9.
Please refer to chapte r "
Key combinations", Page 22 for information on setting the volume
and also enabling/disabling th e loudspeakers using key combinations.
If you attach an external microphone, the built-in microphone is disabled.
When you conne ct headphones or ext ernal speakers, the built-in speakers are d isabled.
Information on con nect ing hea dphones and a microphone can be found
in "
Connecting externa l devic es", Page 44.
Fujitsu Technology Solutions 37
To Next Page
Loading...
