First-time setup of your device
Switching on the device for the fi rst time
Switchingonforthefirst time
The device must be supplied with pow er through the mains adap ter during this process.
When you switch o n the device for the first time, the supplied software is
installed and configured. Because this procedure must not be interrupted,
you shou ld set aside enough time for it to be fully completed and connect
the device to the mains using the mains adapter.
During the installation process, DO NOT restart the device unless
you are requested to do so!
To make it easier to use your de
vice for the first time, the operating s ystem
is p re-installed on the hard d
isk.
► Switch on your device.
► During installation, follow th e instructions on screen.
Consult the operating system manual if anything is unclear about the requested input data.
If a W indows ope rating system is installed on your device, you will find more
information on the syste m and drivers, help programmes, updates, manuals etc.
on the device or on the Internet under "
http://ts.fujitsu.com/suppor t".
10 A26391-K218-Z200-1-7619, edition 1
To Next Page
Loading...
