Fujitsu LIFEBOOK P8110 - Removing a Cover; Removing Memory Modules

Removing an d installing components
during servicin g
Removing a cover
1
1
2
► Remove the screws (1).
Keep the screws in a safe place. If you are removing more than one component at
the same time, store the screws for the individual c omponen ts separate from each
other. If you install the wrong screws, components may be damaged.
► Lift the cover off the notebook (2).
Removing memory modules
3
2
1
1
► Carefully pu sh
the two mounting
clips outwards
(1).
MemoryexpansionMemorymodule

The memory module snaps upwards (2).
► Pull the memory mod
ule out of its slot
in the direction of
the arrow (3).
A26391-K218-Z200-1 -7619 , edition 1 49