Connecting external devices
Connecting an external SATA h ard disk (eSATA)
An external SATA hard disk can be connected at the eSATA port. This allows you to expand the
internal hard disk capacity as you wish. You should obtain a hard disk with a robust casing.
The cable is not included in the delivery scop e. It can be obtained through your
retailer. The length of the eSATA cable m u st not exceed 2 metres. Simple SATA
cables are designed for installation in devices and cannot be used due to the
differences in pin allocation. Please consult a specialist retailer for advice.
The data transfer rate is up to 2,400 Mbit/s.
eSATA
► Connect the data cable to the external
device.
► Connect the data ca ble to the eSATA port
of the computer.
Device dr iverTh e eSATA hard disk is automatically recognised by
your operating system and insta lled.
You will find more informat ion in the documentation for the e xternal SATA
hard disk and the operating system.
Safe remo val of eS
ATA and USB devices
Always correctly remove the device according to the rules described below,
to ensure that none of your data is lost.
► Left-click on the symbol to remove hardware safely.
► Select the device which you want to shut down and remove.
► Press the "Enter" key.
Wait for the dialogue box which tells you that it is now safe to remove the device.
A26391-K218-Z200-1 -7619 , edition 1 45
To Next Page
Loading...
