Working with t he notebook
Connecting the mains adapter to the Port Replicator
1
2
3
► Connect the mains adapter cable to the DC
jack (DC IN) of the P ort Replicator (1).
► Connect the power cable to the
mains adapter (2).
► Plug the power cable into the mains
socket (3).
When the notebook is connected to a Port Re plicator, the operating syste m crea tes
a hardware profile for the "Docked" mode. In this profile, for example, the setting is
saved as to which monitor was last used for output. This pro file will be loaded, as
soon a s the notebook is conne cted to a Port R eplicator of the same type.
Switching on the notebook via the port replicator
► Press the ON/OFF switch on the port replicator to switch th e notebook on.
The power-o
n indicator of the Port Replicator lights up.
A26391-K218-Z200-1 -7619 , edition 1 35
To Next Page
Loading...
