Working with t he notebook
Wireless LAN/Bluetooth radio components
The inst allation of a radio components not approved by Fujitsu Technology Solutions
GmbH will inva lidate the certifications (CE) issue d for this device.
Switching the wireless com
ponents on and off
► Slide the ON /OF F switch into the "ON"
position to activate the wireless components.
Wireless LANWireless LANBluetoothBluetooth
or
► Slide the ON/OFF switch to the
"OFF" position to deactivate the
wireless components.
The Blu etooth and UMTS mod ules and the wireless LAN transmission unit (ante nna)
will also be switched off when you switch off the wireless components.
You can also deactivate the wireless c ompo nents individually in the BIOS Setup.In
order to be able to do this, you will either need to know the supervisor password
if one has been assigned, or no password must have been assigned.
Please read the additional safety notes for devices with wire less
components in the "Safety" manual.
Details on using Wireless LAN can be found in the online help system
included in the Wireless LAN software.
You can find more information on h ow to use Bluetooth on the CD you
received with your Bluetooth software.
You can obtain more information on UMTS from your service provider.
Setting up WLAN access
• Requirement: A W
LAN must be available and you must have the
corresponding a
ccess information.
Information on
config uring the WLAN access can be found in the
documentation
for your opera ting system.
A26391-K218-Z200-1 -7619 , edition 1 31
To Next Page
Loading...
