Connecting external devices
Connecting external devices
Always refer to the safety inform a tion pr ov ided in "Important notes", Page 5 before
connecting or disconnecting any devices to or from your notebook.
Always read the documentation supplied with the device you w ish to conn ect.
Never connect or disconnect cables during a thunderstorm.
Never pull at a cable w h en disconnecting it. Always grasp the plug.
Follow the steps below in orde r, when connecting or disconnect ing
devices to your notebook:
With some devices such as USB device s, it is n ot necessary to switch off
the notebook and the de vice befo re con nect ing/disconnecting. For more
information about whether or not devices need to be switched off, please refer
to the documentation supplied with the external device.
Some of the external devices require special drivers (see the operating
system and external device documentation).
Connecting devices to the notebook
1. Turn off your notebook and all external devices.
2. Unplug your notebook and al
l devices from t he mains sockets.
3. Connect the cables for your external devices following the instructions.
4. Plug all power cables into t
he mains sockets.
DevicesPer ipheralde
vices
Disconnecting dev ices from the notebook
1. Turn off your notebook and all external devices.
2. Unplug your notebook and all dev
ices from the mains sockets.
3. Disconnect the cables for your external devices following the instructions.
DevicesPer ipheraldevices
A26391-K218-Z200-1 -7619 , edition 1 41
To Next Page
Loading...
