Removing an d installing components
during servicin g
Attaching the cover
2
2
1
► Place the cover in the correct mounting position (1).
► Fasten the screws (2).
Finishing component removal
After you have removed or changed the system components as you required, please
prepare your device for op eration again as follows:
► Install the batte ry again (see "
Installing a batter y", Page 26).
► Turn the notebook the right way up again and place it on a flat surface.
► Reconnect the cables that you disco nnected before.
A26391-K218-Z200-1 -7619 , edition 1 53
To Next Page
Loading...
