Manufacturer’s notes
FCC Interference Statement
This equipment has bee n tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy. If not installed and used in accordance with
the instructions, it may cause harmful interference to radio communications.
However, there is no guarantee that interference w ill not occur in a particular insta llation.
If this equipment does cause harmful interference to radio or television r ece ption, w hich
can be determined by turning the equipment off and on, the user is encouraged to try to
correct t he interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the distance between the equipment and the receiver.
3. Connect the equipment to an outlet on a circuit different from the one the receiver is connected to.
4. Consult the dealer or an experienced radio/T V technician for help.
Please note the fo llowing regulatory information related to the optional radio device.
FCC Radio Frequency Exposure statement
This radio device has been evaluated u nder FCC Bulletin OET 65C an d found compliant with the
requirements as set forth in CFR 47 Sections 2.1091, 2.1093, and 15.24 7 (b) (4) addressing RF
Exposure from radio frequency devices. The radiated output power of this radio device is far below
the FCC radio frequency exposure limits. Nevertheless, this device s hall be used in such a manner
that the potential for human contact during normal operation is minimized. When using this device, a
certain separation distance between antenna and nearby persons must be maintained to ensure R F
exposure compliance. In order to comply with RF exposure limits established in the ANSI C95.1
standards, the distance betw een the antennas and the user sho uld not be less tha n 20 cm (8 inches).
Regulatory Notes and Statements
Radio device, health a nd authorisation for use
Radio-frequency electromagnetic energy is emitted from the wireless devices. The energy levels
of these emissions, however, are far much less than the electromagnetic energy emissions from
wireless devices such as mobile phones. Radio devices are safe for use by consumers because
they operate within the guidelines found in radio frequency safety standards and recommendations.
The use of the radio devices may be r estricted in some situations or environments, such as:
• on board an airplane, or
• in an explosive environment, or
• in situations where the interference risk to o ther devices or services is
perceived or identified as harmful.
In cases in which the policy regarding use of radio devices in specific environments is not
clear (e.g., airports, hospitals, chemical/oil/gas industrial plants, private buildings), obtain
authorization to use these devices prior to operating the equipmen t.
Fujitsu 107
To Next Page
Loading...
