Connecting external devices
Connecting U SB devices
USBports
On the USB ports, you can connect e xternal devices that also have a USB port
(e.g. a DVD drive, a printer, a scanner or a modem).
USB devices are hot-pluggable. Th is means you can connect and disconnect
devices while your operating system is running.
USB 1.x has a maximum data t ransfer rate of 12 Mbps.
USB 2.0 has a data transfer rate of up to 480 Mbps.
USB 3.0 has a data transfer rate of up to 5 G bit/s.
Additional information can be found in the document ation for the USB devices.
► Connect the data cable
to the
external device.
► Connect the data cable to a USB
port of the notebook.
Device driver
s
USB devices wi
ll be automatically recognized an d installed by your opera ting system.
80 Fujitsu
To Next Page
Loading...
