Fujitsu LIFEBOOK T734 - Password Protection for Booting of the Operating System

Security functions
Changing the supervisor or user HDD password
You can only change the supervisor H DD password when you have logged into the
BIOS Setup Utility with the supervisor HDD password.
PasswordSupervisorpasswordUserpassword
► Call the BIOS Setup Utility and go to the Security menu.
► W hen changing the password, proceed exactly as for password assignment.
Removing passwords
To remove a password (without setting a new password) perform the following steps:
PasswordSupervisorpasswordUserpassword
► Start the BIO S Setup Utility and go to the Security menu.
► Highlight the Set Supervisor Password or Set User Password field and pre ss the Enter key.

You will be requested to enter the current password by the Enter Current Password prompt.
You will be requested to enter a new password by the Enter N ew Password prompt.
► Press the Enter key twice.
► In the Exit menu, select the option Save Changes & Exit.
► Select Yes and press the Enter k ey.

The notebook will now rebo ot with the password re moved.
Removing the supervisor HDD password simu ltaneously deactivates the user HDD pa ssword.
Password protection f or bootin g of the operating system
With t h e superv
isor HDD passwo rd you have set in the BIOS Se tup Utility
(see section "
S
etting supervisor a nd u ser HDD password", Page 72), you
can also preve
nt booting of the operating system.
Operating system
Activating sy
stem prot ec tion
► Start the BIO S Setup Utility and go to the Security menu.
Operatings ystem
► Select the P
asswordonBootoption and press the Enter key.
► Select the desired op tion ( Disabled, First Boot or Every Boot) and press the Enter key
► Select the
Save Changes & Exit option under Exit.

The notebook will reboot. You will be prompted to enter your password
(the supervisor HDD password).
Deactiv
ating system protection
► Start the BIO S Setup Utility and go to the Security menu.
Operatings ystem
► Select t
he PasswordonBootoption and press the Enter key.
► Select the Disabled option and p ress the Enter key.

If you d
o not want to change any other settings, you can exit BIOS Setup Utility.
► Select the Save Changes & Exit option under Exit.

The no
tebook will reboot. The system is no longer password-protected.
Fujitsu 73