Troubleshooting and tips
The cursor does not correctly follow the
pen movements
Cause
Fault elimination
Pen incorrectly calibrated
► Calibrate the pen as shown under Hardware
and Sound / Tablet PC Settings in the Contr ol
Panel, see "
Setting the pen", Page 36 and
"
Calibrating the pen", Page 37.
Pen input not working
Cause
Troubleshooting
Incorrect driver installed.
► If your device is one which can only be
operated using the pen, install the driver for
the standard model.
or
► If your device is one which can be
operated using the pen and by finger,
install the driver for the "Dual Digitizer"
model.
The notebook ca
nnot be started
Notebook
Cause Troubleshooti
ng
The battery is
not installed correctly.
► Check whether the battery is installed
correctly in its compartment.
► Switch the notebook on.
The battery is de ad.
► Charge the battery.
or
► Insert a c harge d battery.
or
► Connect the AC adapter to the notebook.
The power adapter is not connected correctly.
► Check whether th e A C adapte r is connected
correctly to the n otebook.
► Switch the notebook on.
96 Fujitsu
To Next Page
Loading...
