Less secure is the option to Automatically enter this password protected site
when it is activated. Do not prompt
for authentication. Check the upper box to
get this setting, and each time you navigate to this site OmniPass will log
you into
the site without prompting you to authenticate.
THIS SETTING IS MORE CONVENIENT IN THAT WHENEVER YOU GO TO A SITE REMEMBERED WITH
THIS SETTING
, YOU WILL BYPASS ANY
AUTHENTICATION PROCEDURE AND GAIN INSTANT ACCESS
TO THE SITE
. BUT SHOULD YOU LEAVE YOUR SYSTEM UNATTENDED WITH YOUR
OMNIPASS USER
LOGGED IN
, ANYONE USING YOUR SYSTEM CAN BROWSE TO YOUR PASSWORD PROTECTED SITES
AND GAIN AUTOMATIC ACCESS
.
If you uncheck both boxes in Settings for this Password Site, OmniPass will prompt
you for your master password or
fingerprint authentication device. Once you have
authenticated with OmniPass your credentials will be filled in to the
site login
prompt, but you will have to click the website [OK], [Submit], or [Login] button to
gain access to the site.
Click Finish to complete the remember password procedure. The site location, the
credentials to access the site, and
the OmniPass authentication settings for the
site are now stored in the OmniPass secure database. The OmniPass
authentication settings (Settings for this Password Site) can always be changed
in Vault Management.
Logging in to a Remembered Site
Whether or not OmniPass prompts you to authenticate when you return to a
remembered site is determined by
Settings for this Password Site and can be changed in Vault Management.
The following cases are applicable to using OmniPass to login to: Windows,
remembered web sites, and all other
password protected resources.
With Master Password
Once you return to a site you have remembered with OmniPass, you may be
presented with a master password
prompt. Enter your master password and you
will be allowed into the site.
Appendix 118
To Next Page
Loading...
