Working with the notebook
1
2
3
► Position the notebook on the port replicator in such a way that the docking connector on the
underside of the notebook is a ligned with the docking connector of the port replicator as shown.
► Press down
on the notebook’s rear corners so that it locks into position.
► Connect the AC adapter cable t o the DC jack (DC IN) of the port replicator (1).
► Connect t
he power cable to the AC adapter (2).
► Plug the power cable into the power outlet (3).
Power outlets will vary from country to country, see chapter "When
travel ling in other countries ", Page 14.
Fujitsu 67
To Next Page
Loading...
