Fujitsu M10 Product Notes

Table 3-12
Problems resolved in XCP 2210 (continued)
SPARC M10-
RTI No. 1 4 4S Description Workaround
RTIF2-
131218-001
x x x While Solaris OS is running, if physical
partition is reset due to the output of the
"Hypervisor Abort" message on the OS
console, the state of Oracle VM Server for
SPARC may change to maintenance
mode at the next reboot of the physical
partition.
There is no effective workaround.
[How to restore]
Reboot the control domain only.
If the state of Oracle VM Server for
SPARC does not become "online",
execute the "rebootxscf -a" command to
reset all the XSCFs and then check the
state of Oracle VM Server for SPARC
once again. If the state has not yet
become "online", once more
reboot the
control domain only.
RTIF2-
140122-001
x When a PCI Expansion Unit is connected
to a logical system board whose LSB
number is equal to or more than 01
(LSB#01), if direct I/O feature is enabled
in respect to the PCI Expansion Unit, the
PCI Expansion Unit may not be
recognized by the logical domain.
If the PCI
Expansion Unit is not
recognized, reboot the logical domain.
Fujitsu M10/SPARC M10 Systems Product Notes for XCP Version 2240
･
March 2015108

Fujitsu M10 Specifications

General

Brand	Fujitsu
Model	M10
Category	Server
Language	English