C156-E142-02EN 6 - 1
CHAPTER 6 DIAGNOSIS AND MAINTENANCE
6.1 Diagnosis
6.2 Maintenance Information
This chapter contains diagnosis and maintenance information.
6.1 Diagnosis
Table 6.1 shows a test executed by the diagnostic function.
The drive has a self-diagnostic function. This function can check the basic operations of the drive.
A test program running in the host system is required to check general operations, including
operations of the interface with the host system. (See Subsection 6.1.3.)
Table 6.1 Self-diagnostic function
Diagnostic contents Target
Initial self diagnosis Basic operation
(hardware function test)
Diagnostic command Basic operation
Test program General operation
To Next Page
Loading...
