C156-E142-02EN 1 - 1
CHAPTER 1 GENERAL DESCRIPTION
1.1 Features
1.2 Drive Configuration
1.3 System Configuration
This chapter describes the features and configuration of the optical disk drives.
The MCE3130AP, MCE3064AP, MCF3064AP (hereafter optical disk drives) is disk that maintain the
compatibility and intend high speed as the succeed drive of the MCE3130AP, MCE3064AP, MCF3064AP.
The MCE3130AP, MCE3064AP, MCF3064AP is high-performance, 90mm(3.5-inch) commutative
rewritable optical disk drive which incorporates an ATAPI controller.
The interface connecting the MCE3130AP, MCE3064AP, MCF3064AP drives to the host system complies
with the ATA/ATAPI-4.
The flexibility and expandability through ATAPI I/F, the high performance of the MCE3130AP,
MCE3064AP, MCF3064AP optical disk drives, and the drive's commands set enable the user to construct
high-reliability, high-performance disk subsystems with advanced functions and large-scale storage.
1.1 Features
This section describes the following drive features:
! Performance
! Reliability
! Maintainability/operability
! Adaptability
! Interface
To Next Page
Loading...
