Fujitsu Mobile Color Scanner User Manual

28
AAAAAAAAAAAAAAAAAAAA
BBBBBBBBBBBBBB
CCCCCCCCCCCCCCCCCCCCC
DDDDDDDDDDDDDDDDDDDD
EEEEEEEEEEEEEEEEEEEEEEE
FFFFFFFFFFFFFFFFFFFFFFFFFF
GGGGGGGGGGGGGGGGGGGG
HHHHHHHHHHHHHHHHHHHH
IIIIIIIIIIIIIIIIIIIIIIIIII
JJJJJJJJJJJJJJJJJJJJJJJJJJ
KKKKKKKKKKKKKKKKKKKK
AAAAAAAAAAAAAAAAAAAA
BBBBBBBBBBBBBBBBBBBBB
CCCCCCCCCCCCCCCCCCCCC
DDDDDDDDDDDDDDDDDDDD
EEEEEEEEEEEEEEEEEEEEEEE
FFFFFFFFFFFFFFFFFFFFFFFFF
EEEEEEEEEEEEEEEEEEEEEEE
FFFFFFFFFFFFFFFFFFFFFFFFFF
GGGGGGGGGGGGGGGGGGGG
HHHHHHHHHHHHHHHHHHHH
IIIIIIIIIIIIIIIIIIIIIIIIII
JJJJJJJJJJJJJJJJJJJJJJJJJJ
KKKKKKKKKKKKKKKKKKKK
The following explains how to scan a large original the scanner cannot scan at one time.
This scanner stitches the images of an original mainly consisting of text (called a document
below) using the character image stitching function, and photographic and picture images
using the photograph image stitching function.
Checking Whether the Scanner Can Scan the Original You
Want to Scan
For information on the conditions and sizes for originals this scanner can scan, see
“Conditions for Originals the Scanner Can Scan” and “Original Sizes the Scanner Can
Scan”.
Before Scanning an Original
Requirement for target images
It takes time to stitch color or gray-scale images because the amount of data is very large.
Your computer must have at least 64 MB of memory. (Recommended memory: 128 MB)
For character image stitching
Scan the document so that the images to be stitched overlap each other and the overlapping
area contains at least two or three lines.
Scanning a Large Original
Original
Character images
 Guide
04_Scanner (28-33) 8/15/01, 8:39 AM28

Fujitsu Mobile Color Scanner Specifications

General

Brand	Fujitsu
Model	Mobile Color Scanner
Category	Scanner
Language	English