53
Glossary
Terms that may be unfamiliar to beginners are described below.
Calibration
Operation for determining the reference values for black and white areas, so that the
computer can accurately identify each information item in an image scanned by the scanner.
For the Mobile Color Scanner, use the calibration sheet supplied with it for calibration. Be
sure to perform calibration before using this scanner for the first time.
Install
To incorporate software and hardware information into a computer and make the information
ready.
To use this scanner, software called the scanner driver must be installed. The scanner
cannot scan images just by connecting it to a computer with the cable.
Resolution
Resolution is expressed as the number of pixels (dots) per inch (dpi). If the resolution is
higher, the image can be read in greater detail, but the memory requirement also increases.
Select a suitable resolution for the digitized image.
Scanner driver
Program for making this Mobile Color Scanner available for software compatible with
scanners. This scanner driver conforms to TWAIN, which is a standard for interfaces
between an image input-output device such as a scanner and digital cameras and software.
Stitching Mode
Select this mode to scan a large document or image original that cannot be scanned at
one time. This driver automatically stitches adjoining images while reading the printed
document and sends one image to the application.
TWAIN
The standard for interfaces between an image input-output device such as a scanner and
digital cameras and software.
06_Scanner (50-53) 8/15/01, 8:43 AM53
To Previous Page
Loading...
Need help?
General